HC080180M52X – Heat Blanket
Hazardous Environment, 8″ X 18″ Heat Blanket, 220V
Supervisory Heat Blankets are used when performing a composite repair in a hazardous or flightline environment. These blankets have a very unique construction and includes four layers of protection. Three layers combine to effectively reduce hazardous situations in a vapor volatile environment.
The Supervisory Heat Blankets are designed to be used with our HCS9000/9200FL (Flightline) Series Composite Repair Systems. If the blanket sensor detects a high cure temperature the controller will disable power output to the blanket. The circuit will then reset itself when the temperature falls below the critical level. An indicator and alarm on the HEATCON® Flightline Repair System will alert the operator to the condition.
PLUGS NOT INCLUDED
• Maximum Width – 42 In (91.4cm)Unspliced
• Maximum Length – 136 In. (304.8cm)Unspliced
• Maximum Temperature – 500°F (232°C)
• Watt Density – 5 watts/In.2 (.8 watts/cm2)
• Standard Material – Textured Silicone Rubber
• Standard Leads – Teflon® insulated 600V/400°F (204°C)
• Standard Lead Length – 5 Ft. (152.4cm)
• Standard Input Power – 120V or 220/240V (others available)
• Double Bus Bar Construction – to Maximize Strain Relief
• External Tabs – Increase Heating Area
• Heat Mapping – to test thermal uniformity
• Supervisory Circuits – for Hazardous Environments